BSB Dampers
Air, Fire and Smoke Control
Home  :  Product Range  :  Installation Methods  :  FD Series  :  FD Series in Concrete/Masonry Floor - Angle Frame Fitted
BSB Engineering Services Ltd.
Unit 56, Trinity Trade Centre,
Mill Way, Sittingbourne,
Kent ME10 2PD, United Kingdom
Tel: +44(0)1795 422609
Fax: +44 (0)1795 429543
Email:
For purchase orders and order related enquiries:
orders@bsb-dampers.co.uk

For pricing, technical and general customer service enquiries:
enquiries@bsb-dampers.co.uk

FD Series - Installation Methods

Installations tested/assessed to BS EN 1366-2 and classified to BS EN 13501-3*

In Concrete/Masonry Floor - Angle Frame Fitted

Single section sizes (mm): 100 x 100 to 1200 x 1000

Assessed from both sides
Tested to BS EN 1366-2 for 4 hours. Equivalent to BS EN 13501-3 Classification: E240
BSEN 1366-2 test/assessment references: CC 282572
Meets the requirements of BS 476-20/22 - Refer to BS476-10.6.6.3

* If your proposed installation method has minor variations to that shown, please confirm acceptance with the local Building Control Authority (BCA) before proceeding. Manufacturers are not able to "approve" specific installation methods. It is generally accepted that EN 1366-2 tested installations will fulfil any requirements to BS 476-20/22 as the test method is much more severe.

Click on diagram to view larger image

The FD Series installation methods are listed below.


BSB Engineering Services Ltd. reserves the right to modify or withdraw any specification without prior notice that may result from continuous product development. The information contained within this website is for reference only. Full product details should be obtained from our Sales Office.

Designed and Hosted by Pregnant Prawn Design.